NEURAL INDUSTRIAL AUTOMATION

NEURAL INDUSTRIAL AUTOMATION

Temperature, RH and DP Indicators

The NIA “Clean Room Process Monitor” has been specifically developed keeping process measurement requirements of CLEAN ROOMS in Pharmaceutical industries. The Process Monitor can measure Temperature, RH Inbuilt integral Sensor, Differential Pressure Inbuilt Sensor or three analog inputs or two analog inputs and inbuilt differential pressure sensor. It has an on demand dew point display. The monitor has status LEDs for process violation indication. RH, Temperature and Differential pressure will be displayed individually and data transfers to any master device on MODBUS RS-485 communication. It also has a communication diagnosis LED. The monitor has an inbuilt buzzer for audible process violation. It has a keypad to program and calibrate the instrument by user. It has a stainless steel Modular Faceplate, which is designed as a mounting accessory for monitors suited for brick and modular walls for Clean Room applications where you need a flush mounting mechanism

Features

  • Programmable baud rate between 9.6k/19.2k/38.4k.
  • Advanced Microcontroller based process measurement
  • Software programmable channel ranges and units. 
  • Programmable resolution.
  • 4 Digit, 0.39″/0,56″/0.8″/1.0″/1.2″/1.5″/1.8″/2.0″bright 7- Segment LED display for displaying Temperature , RH and DP
  • Process parameter status indication with 3 Bi-Color #mm LEDs.
  • User selectable set limits for process value violation.
  • Inbuilt buzzer to audible process value violation.
  • Password protection for calibration and programming mode.
  • Software calibration for 3 channels.
  • MODBUS RTU multi drop R S- 485 serial communication for PLC,SCADA,etc.
  • Programmable baud rate between 9.6k/19.2k/38.4k
  • Diagnosis indication of communication with master.
  • Remote programmable from master device.
  • User programmable offset correction. Brick and modular wall mounting.
  • Stainless steel enclosure.

Specifications

Input Type: 

  • Inbuilt integral Sensors/4-20mA/0 to 10VDC

Measuring Ranges:

  • %RH: 0.0 to 100%RH. Temp: -40’C to 100’C.
  • DP: -105.4 to 105.4 mm WC, -1034 to 1034 Pascal s and 8 types of units with equivalent values.

Accuracy:

 

  • %RH: ±2% RH for 10 to 90% and ±4% RH for remaining.
  • Temperature: ±0.3’C for O’C to 50’C and 2’C for remaining.
  • DP: ±1.5% for all units.

Resolution:

  • %RH: 110.1% RH.
  • Temp: 1/0.1’C.
  • DP: 0.1 mm WC.

Power supply:

  • 24VDC/24VAC.